INFILL OF CWC COATED LINES WITH PUs

 

Company Services Swiss SA Group manufacture and apply a complete and comprehensive range of HDPUF matching any specification requirement and with the shortest possible cycle time. Company Services Swiss SA Group HDPUFs offer very short cycle time maximizing the installation rate, as an example Company Services Swiss SA have proved cycle time of less than 3 minutes on a 42” with a very thick 5” CWC.

Company Services Swiss SA HDPUFs range of materials are available from dry densities of 100 kg/m3 to even in excess of 200 kg/m3, in order to achieve the required mechanical strengths. As a manufacturer of HDPUFs, Company Services Swiss SA tailor the material to the specific project requirements (e.g. joint volumes, ambient conditions, desired reactivity, hardening time, etc.) in order to fully optimize the final result for both Companies and Contractors.

 

infill Solid PU

Company Services Swiss SA Group manufacture and apply a complete and comprehensive range of Solid PUs matching any specification requirement and with the shortest possible cycle time. Company Services Swiss SA Group SOLID PUs offer very short cycle time maximizing the installation rate, types are available – depending on the requirements on the materials – for high pressure PU injection equipment and for low pressure PU injection equipment or even for manual mix & pour for special applications (spools, tees, risers, pipelines crossings, etc.).

Company Services Swiss SA SOLID PUs range of materials are available from moulded densities of 900 kg/m3 to even in excess of 2200 kg/m3, in order to achieve the required mechanical strengths. As a manufacturer of SOLID PUs, Company Services Swiss SA tailor the material to the specific project requirements (e.g. joint volumes, ambient conditions, desired reactivity, hardening time, etc.) in order to fully optimize the final result for both Companies and Contractors.